Description
| range | PowerLogic. |
|---|---|
| product name | PowerLogic PM5000. |
| device’s short name | PM5563. |
| product or component type | Power meter. |
| power quality analysis | Up to the 63rd harmonic. |
|---|---|
| metering type | Measured the neutral current. Calculated ground current. |
| device application | Power monitoring. WAGES metering. Gateway. Multi-tariff. |
| type of measurement | Current. Voltage. Frequency. Power factor. Energy. Active and reactive power. |
| supply voltage | 125–250 V DC. 100…480 V AC 45…65 Hz. |
| network frequency | 60 Hz. 50 Hz. |
| [In] rated current | 5 A. 1 A. |
| type of network | 1P + N. 3P. 3P + N. |
| maximum power consumption in VA | 10 VA at 480 V |
| ride-through time | 35 ms 120 V AC typical. 129 ms 230 V AC, typical. |
| display type | Without display. |
| sampling rate | 128 samples/cycle. |
| measurement current | 5…10000 mA. |
| analogue input type | Voltage (impedance: 5 MOhm). Current (impedance: 0.3 mOhm). |
| measurement voltage | 20…400 V AC, 45…65 Hz between phase and neutral. 20…690 V AC, 45…65 Hz between phases. |
| frequency measurement range | 45…65 Hz. |
| number of inputs | 4 digital |
| measurement accuracy | Apparent power +/- 0.5%. Frequency +/- 0.05%. Active energy +/- 0.2 %. Reactive energy +/- 1%. Active power +/- 0.2%. Voltage +/- 0.1 %. Power factor +/- 0.005. Current +/- 0.15 °C. |
| accuracy class | Class 0.2S active energy conforms to IEC 62053-22. |
| number of outputs | 2 digital. |
| information displayed | Tariff (8). |
| communication port protocol | Modbus RTU and ASCII at 9.6, 19.2, and 38.4 kbauds,. even/odd or none—2 wires, insulation 2500 V. JBUS. Modbus TCP/IP at 10/100 Mbit/s, insulation 2500 V. Ethernet Modbus TCP/IP daisy chain BACnet IP. |
| communication port support | RS485. Ethernet. |
| communication gateway | Ethernet/serial. |
| data recording | Maintenance logs. Event logs. Alarm logs. Time stamping. Data logs. Min/max of instantaneous values. |
| memory capacity | 1.1 MB. |
| web services | Alarm notification by e-mail. Diagnostic via predefined web pages. Web server. Real-time viewing of data. |
| Ethernet service | SNMP-Traps. SNTP client. |
| connections—terminals | Voltage circuit: screw terminal block 4. Control circuit: screw terminal block 2. Current transformer: screw terminal block 6. RS485 link: screw terminal block 4. Digital input: screw terminal block 8. Digital output: screw terminal block 4. Ethernet network: RJ45 connector 2. |
| mounting mode | Clip-on |
| mounting support | DIN rail |
| standards | EN 50470-1. IEC 60529. IEC 62053-24. UL 61010-1. IEC 62053-22. IEC 61557-12. EN 50470-3. ANSI C12.20. |
| product certifications | CE conforming to IEC 61010-1. CULus conforms to UL 61010-1. BTL |
| width | 96 mm. |
| depth | 72 mm. |
| height | 96 mm. |
| net weight | 450 g. |
| electromagnetic compatibility | Limits for harmonic current emissions in class A conform to IEC 61000-3-2. Conducted RF disturbances at level 3, conforming to IEC 61000-4-6. Magnetic field at power frequency level 4 conforms to IEC 61000-4-8. Conducted and radiated emissions in class B, conforming to EN 55022. Limitation of voltage changes, voltage fluctuations, and. flicker in low-voltage conforming to IEC 61000-3-3. Electrostatic discharge, test level: 8 kV, level 4. conforming to IEC 61000-4-2. Radiated radio-frequency electromagnetic field. immunity test conforming to IEC 61000-4-3. Electrical fast transient/burst immunity test level 4. conforming to IEC 61000-4-4. Surge immunity test level 4 conforms to IEC 61000-4-5. Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
|---|---|
| IP degree of protection | IP52 front: conforming to IEC 60529 IP30 body: conforming to IEC 60529 |
| relative humidity | 5… 95% at 50 °C. |
| pollution degree | 2 |
| ambient air temperature for operation | -25…70 °C. |
| ambient air temperature for storage | -40…85 °C. |
| operating altitude | 3000 m. |
| Unit Type of Package 1 | PCE. |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1: Weight | 610 g. |
| Package 1: Height | 9.1 cm |
| Package: 1 width | 9.6 cm |
| Package 1 Length | 9.6 cm |
| Sustainable offer status | Green premium product. |
|---|---|
| REACh Regulation | REACh Declaration. |
| EU RoHS Directive |
Compliant
EU RoHS Declaration. |
| Mercury free | Yes |
| RoHS exemption information | Yes. |
| China’s RoHS Regulation | China RoHS declaration. |
| Environmental Disclosure | Product Environmental Profile. |
| Circularity Profile | End-of-life information. |
| WEEE | The product must be disposed of on European Union markets following specific waste collection procedures and never end up in rubbish bins. |
The PowerLogic PM5563 is a sophisticated power meter designed to provide comprehensive monitoring and analysis of electrical systems. Part of Schneider Electric‘s PowerLogic series, the PM5563 is equipped with advanced features that make it suitable for both industrial and commercial applications.
Key Features
- Dual Ethernet Ports: The PM5563 features two Ethernet ports, which support simultaneous connections to different networks or redundant networks for increased reliability and flexibility in data communication. This configuration ensures continuous data flow and system monitoring even if one network fails.
- High Accuracy: The meter offers high measurement accuracy, essential for precise energy management and monitoring. It provides detailed information on voltage, current, power, energy, and power quality parameters, helping users optimize their electrical systems and reduce operational costs.
- Comprehensive Data Collection: The PM5563 can capture and analyze a wide range of electrical parameters, including harmonics, power factor, and total harmonic distortion (THD). This data helps in identifying potential issues and improving the efficiency of the electrical system.
- User-Friendly Interface: It features a graphical display that provides real-time data and easy-to-understand visualizations of the electrical parameters. The user interface allows for quick navigation through different data views and settings, enhancing the ease of use.
- Advanced Communication Protocols: The meter supports various communication protocols, including Modbus TCP/IP, which facilitates integration with other systems and devices. This feature is crucial for building automation and energy management systems.
- Data Logging and Alarming: The PM5563 includes data logging capabilities, which enable the recording of historical data for trend analysis and reporting. It also offers alarming functions to notify users of any anomalies or out-of-range conditions, allowing for prompt corrective actions.
- Remote Monitoring and Control: With its Ethernet connectivity, the PM5563 allows for remote monitoring and control of the electrical system. This capability is beneficial for facility managers and operators who need to access data and perform adjustments from a remote location.
- Energy and Power Quality Analysis: The meter provides in-depth analysis of energy consumption and power quality, helping users to identify inefficiencies and potential areas for improvement. This analysis supports effective energy management strategies and contributes to cost savings.
Applications
The PowerLogic PM5563 is ideal for applications in industrial facilities, commercial buildings, and utility sectors. It is particularly useful in environments where precise measurement and monitoring of electrical systems are critical for operational efficiency, safety, and cost control.
Conclusion
The PM5563 power meter stands out due to its dual Ethernet ports, high accuracy, comprehensive data collection, and advanced communication capabilities. It provides valuable insights into electrical system performance, enabling users to enhance energy efficiency, reduce downtime, and improve overall system reliability. Its versatility and robust features make it a valuable tool for modern energy management and monitoring solutions.
