Sale!
The ATV312H075S6 from Schneider Electric is a compact and efficient VFD tailored for optimizing motor performance in industrial settings.

ATV312H075S6 Schneider Electric

Original price was: $1,892.00.Current price is: $1,455.00.

The Schneider Electric ATV312H075S6 is a versatile variable frequency drive (VFD) designed for industrial applications.

45 in stock

Free shipping on orders over $5000!

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
Categories: ,

Description

Main
Range of product Altivar 312.
Product or component type Variable speed drive.
Product destination Asynchronous motors.
Product specific application Simple machine.
Assembly style With heat sink.
Component name ATV312.
Motor power kW 0.75 kW.
Motor power hp 1 hp
[Us] rated supply voltage 525…600 V – 15…10 %.
Supply frequency 50…60 Hz – 5…5 %.
Network number of phases 3 phases.
Line current 2.8 A at 525 V, Isc = 5 kA.
2.4 A at 600 V.
EMC filter Without EMC filter.
Apparent power 2.5 kVA.
Maximum transient current 2.6 A for 60 s.
Power dissipation in W 36 W at nominal load.
Speed range 1…50.
Asynchronous motor control profile Sensorless flux vector control with PWM type motor control signal.
Factory set : constant torque.
Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1…LI6 terminal 2.5 mm² AWG 14.
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5 mm² AWG 10.
Supply Internal supply for logic inputs: 19–30 V, 100 mA. protection type: overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm): 10…10.8 V 10 mA, protection type: overload and short-circuit protection.
communication port protocol Modbus.
CANopen.
IP degree of protection IP20 on the upper part without a cover plate.
IP21 on connection terminals.
IP31 on the upper part.
IP41 on the upper part.
Option card Communication card for the CANopen Daisy Chain.
Communication card for DeviceNet.
Communication card for Fipio.
Communication card for Modbus TCP.
Communication card for Profibus DP.
Complementary
Supply voltage limits 446.25…660 V.
Prospective line Isc 5 kA
Continuous output current 1.7 A at 4 kHz.
Output frequency 0…500 Hz
Nominal switching frequency 4 kHz
Switching frequency 2–16 kHz adjustable.
Transient overtorque 170…200% of nominal motor torque.
Braking torque 150% during 60 s with a braking resistor.
100% with the braking resistor continuously.
15% without a braking resistor.
Regulation loop Frequency PI regulator.
Motor slip compensation Automatic, whatever the load.
Adjustable.
Suppressable.
Output voltage <= power supply voltage.
Tightening torque Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1… LI6: 0.6 N.m.
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 1.2 N.m.
insulation Electrical between power and control.
Analogue input number 3
Analogue input type AI1 configurable voltage 0…10 V, input voltage 30 V max, impedance: 30000 Ohm.
AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm.
AI3 configurable current: 0.20 mA, impedance: 250 Ohm.
Sampling duration AI1, AI2, AI3: 8 ms analog.
LI1…LI6: 4 ms discrete.
Response time AOV, AOC, 8 ms for analog.
R1A, R1B, R1C, R2A, R2B 8 ms for discrete.
Linearity error +/- 0.2% for output.
Analogue output number 1
Analogue output type AOC configurable current: 0…20 mA, impedance: 800 Ohm, resolution: 8 bits.
AOV configurable voltage: 0…10 V, impedance: 470 Ohm, resolution: 8 bits.
Discrete input logic Logic input not wired (LI1…LI4), < 13 V (state 1).
Negative logic (source) (LI1…LI6), > 19 V (state 0).
Positive logic (source) (LI1…LI6), < 5 V (state 0), > 11 V (state 1).
Discrete output number 2
Discrete output type Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC = 100000 cycles.
Configurable relay logic: (R2A, R2B) NC: 100000 cycles.
Minimum switching current R1-R2: 10 mA at 5 V DC.
Maximum switching current R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4, and L/R = 7 ms.
R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4, and L/R = 7 ms.
R1-R2: 5 A at 250 V AC resistive load, cos phi = 1, and L/R = 0 ms.
R1-R2: 5 A at 30 V DC resistive load, cos phi = 1, and L/R = 0 ms.
Discrete input number 6
Discrete input type (LI1…LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm.
Acceleration and deceleration ramps S, U or customized.
Linear is adjustable separately from 0.1 to 999.9 s.
Braking to standstill By DC injection.
Protection type Input phase breaks: drive.
Line supply overvoltage and undervoltage safety circuits: drive.
Line supply phase loss safety function, for three phases supply: drive.
Motor phase breaks: drive.
Overcurrent between output phases and earth (on power-up only): drive.
Overheating protection: drive.
Short-circuit between motor phases: drive
Thermal protection: motor.
Insulation resistance >= 500 mOhm at 500 V DC for 1 minute.
Local signalling 1 LED (red) for drive voltage.
Four 7-segment display units for CANopen bus status.
Time constant 5 ms for reference change.
Frequency resolution Analog input: 0.1…100 Hz
Display unit: 0.1 Hz.
Connector type 1 RJ45 for Modbus/CANopen.
Physical interface RS485 multidrop serial link.
Transmission frame RTU.
Transmission rate 10, 20, 50, 125, 250, 500 kbps, or 1 Mbps for CANopen.
4800, 9600, or 19200 bps for Modbus.
Number of addresses 1…127 for CANopen.
1…247 for Modbus.
Number of drive 127 for CANopen.
31 for Modbus.
Marking CE
Operating position Vertical +/- 10 degrees.
Height 143 mm.
Width 107 mm.
Depth 152 mm.
Net weight 1.7 kg.
Environment
Dielectric strength 2550 V DC between earth and power terminals.
3600 V AC between control and power terminals.
Electromagnetic compatibility 1.2/50 µs–8/20 µs surge immunity test level 3, conforming to IEC 61000-4-5.
Electrical fast transient/burst immunity test level 4 conforms to IEC 61000-4-4.
Electrostatic discharge immunity test level 3 conforms to IEC 61000-4-2.
Radiated radio-frequency electromagnetic field immunity test level 3 conforms to IEC 61000-4-3.
Standards IEC 61800-3.
IEC 61800-5-1.
product certifications DNV.
GOST.
CSA.
C-Tick.
UL.
NOM.
Pollution degree 2
Protective treatment TC
Vibration resistance 1 gn (f = 13…150 Hz) conforming to EN/IEC 60068-2-6.
1.5 mm (f = 3…13 Hz) conforming to EN/IEC 60068-2-6.
Shock resistance 15 gn for 11 ms, conforming to EN/IEC 60068-2-27.
Relative humidity 5… 95%% without condensation, according to IEC. 60068-2-3
5% without dripping water, according to IEC 60068-2-3.
Ambient air temperature for storage -25…70 °C.
Ambient air temperature for operation -10…50 °C without derating (with protective cover on top of the drive).
-10…60 °C with derating factor (without protective cover on top of the drive).
Operating altitude <= 1000 m without derating.
1000–3000 m with current derating 1 % per 100 m.

Related products