ATS48C66Y – soft starter for asynchronous motor

Altistart 48.

Asynchronous motors.

Heavy-duty industry and pumps.

ATS48.

208…690 V – 15…10 %.

160 kW at 230 V for severe applications.
315 kW at 400 V for severe applications.
355 kW at 400 V for standard applications.
355 kW at 440 V for severe applications.
400 kW at 440 V for standard applications.
400 kW at 500 V for severe applications.
400 kW at 525 V for severe applications.
560 kW at 660 V for severe applications.
560 kW at 690 V for severe applications.
630 kW at 660 V for standard applications.
630 kW at 690 V for standard applications.

200 hp at 208 V for standard applications.
200 hp at 230 V for severe applications.
250 hp at 230 V for standard applications.
400 hp at 460 V for severe applications.
500 hp at 460 V for standard applications.
500 hp at 575 V for severe applications.
600 hp at 575 V for standard applications.

1731 W for standard applications.
1958 W for standard applications.

AC-53A.

Start with torque control (currently limited to 5 inches).

660 A for connection in the motor supply line for severe applications.
660 A for connection in the motor supply line for standard applications.

With heat sink.

External bypass (optional).

50…60 Hz, 5…5 %.

47.5…63 Hz.

In the motor supply line.

2

(LO1) logic output 0 V common configurable.
(LO2) logic output 0 V common configurable.
(R1) relay outputs fault relay NO.
(R2) relay outputs end of starting relay NO.
(R3) relay outputs motor-powered NO.

+/- 5 %

10 mA at 6 V DC for relay outputs.

Logic output: 0.2 A at 30 V DC.
Relay outputs 1.8 A at 230 V AC. inductive load, cos phi = 0.5 20 ms.
Relay outputs 1.8 A at 30 V. DC inductive load, cos phi = 0.5 ms.

5

PTC, 750 Ohm at 25 °C.
(Stop, Run, LI3, LI4) logic, <= 8 mA, 4300 Ohm.

24 V <= 30 V.

Positive logic Stop, Run, LI3, .LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA.

0.4…1.3 Icl adjustable.

Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm.

Modbus

1 RJ45

Serial

RS485 multidrop.

4800, 9600 or 19200 bps.

31

Phase failure: line.
Thermal protection: motor.
Thermal protection: starter.

CE

Vertical +/- 10 degree.

670 mm

400 mm

300 mm

51.4 kg

110…220 kW at 200…240 V, 3 phases.
250…500 kW at 380…440 V in 3 phases.

Soft starter

Conducted and radiated emissions level A. conforming to IEC 60947-4-2.
Damped oscillating waves, level 3, conforming to IEC 61000-4-12.
Electrostatic discharge level 3 conforms to IEC 61000-4-2.
Immunity to electrical transients, level 4 conforming to IEC 61000-4-4.
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3.
Voltage/current impulse level 3 conforming to IEC 61000-4-5.

EN/IEC 60947-4-2.

SEPRO
DNV
CCC
NOM 117
CSA
UL
GOST
TCF
C-Tick

55 dB

0…95 % without condensation or dripping water. conforming to EN/IEC 60068-2-3.

40…60 °C (with current derating of 2 % per °C).
-10…40 °C (without derating).

-25…70 °C.

<= 1000 m without derating.
> 1000…2000 m with current derating of 2.2 % per additional 100 m.