Description

Main
range of product	Modicon M340 automation platform.
product or component type	Processor module.
number of racks	4
number of slots	11
discrete I/O processor capacity	1024 I/O multi-rack configuration. 704 I/O single-rack configuration.
analogue I/O processor capacity	256 I/O multi-rack configuration. 66 I/O single-rack configuration.
number of application specific channel	36
monitoring	Diagnostic counters Modbus. Event counters Modbus.

Complementary
control channels	Programmable loops.
motion control	Independent axis CANopen.
integrated connection type	Non-isolated serial link RJ45 character mode. asynchronous in baseband, RS232C 2 twisted shielded. pairs 0.3–19.2 kbit/s full duplex. Non-isolated serial link RJ45 character mode. asynchronous in baseband, RS485 1 twisted shielded. pair 0.3–19.2 kbit/s, half duplex. Non-isolated serial link RJ45, master/slave Modbus. RTU/ASCII asynchronous in baseband, RS232C 1. twisted shielded pair 0.3–19.2 kbit/s, half duplex. Non-isolated serial link RJ45, master/slave Modbus. RTU/ASCII asynchronous in baseband, RS485 1 twisted shielded pair 0.3–19.2 kbit/s, half duplex. USB port at 12 Mbit/s. CANopen master bus SUB-D 9, transmission mode: 2. twisted shielded pairs at 20 kbit/s… 1 mbit/s.
communication module processor capacity	2 Ethernet communication modules. 4 AS-Interface module.
embedded communication service	Network management (NMT) can be opened. Process Data Object (PDO) CANopen. Service Data Object (SDO) CANopen. Special functions (SYNC, EMCY, and TIME) can be opened.
transmission rate	1 Mbit/s 0.00…65.62 ft (0.20 m) 0.00…1.97 ft (0.0.6 m). 125 kbit/s 0.00…1640.42 ft (0…500 m) 0.00…32.81 ft (0…10 m). 20 kbit/s 0.00…8202.10 ft (0…2500 m) 0.00…984.25 ft (0…300 m). 250 kbit/s 0.00…820.21 ft (0…250 m) 0.00…32.81 ft (0…10 m). 50 kbit/s 0.00…3280.84 ft (0…1000 m) 0.00…393.70 ft (0…120 m). 500 kbit/s 0.00…328.08 ft (0…100 m) 0.00…32.81 ft (0…10 m). 800 kbit/s 0.00…131.23 ft (0…40 m) 0.00…19.69 ft (0…6 m).
bus type	CANopen M20 DS 301 V4.02 devices linked by daisy-chaining or tap junctions (CSMA/CA). CANopen M20 DS 303-2 devices linked by daisy-chaining or tap junctions (CSMA/CA). CANopen M20 DS 405 devices linked by daisy-chaining or tap junctions (CSMA/CA).
number of slave	63 CANopen.
number of devices per segment	0…32character mode).. 0…32Modbus) 0…16 672.57 ft (205 m) CANopen) 0…32 606.96 ft (185 m) CANopen). 0…64 524.93 ft (160 m) CANopen).
number of devices	point-to-point character mode. 2 point-to-point Modbus.
bus length	0.00…32.81 ft (0…10 m) serial link non-isolated character mode segment. 0.00…32.81 ft (0…10 m) serial link non-isolated Modbus segment. 0.00…3280.84 ft (0…1000 m) serial link isolated character mode segment. 0.00…3280.84 ft (0…1000 m) serial link isolated Modbus segment. 0.00…49.21 ft (0…15 m) character mode point-to-point. 0.00…49.21 ft (0…15 m) Modbus point-to-point.
maximum tap links length	<49.21 ft (15 m) serial link non-isolated character mode segment. <49.21 ft (15 m) serial link non-isolated Modbus segment. <131.23 ft (40 m) serial link isolated character mode segment. <131.23 ft (40 m) serial link isolated Modbus segment.
number of addresses	0…248 character mode. 0…248 Modbus.
requests	1 K data bytes per request, character mode. 252 data bytes per RTU request, Modbus. 504 data bytes per ASCII request Modbus.
control parameter	One CRC on each frame (RTU) Modbus. One LRC on each frame (ASCII) character mode. One LRC on each frame (ASCII) Modbus.
memory description	A supplied memory card (BMXRMS008MP) provides backups of programs, constants, symbols, and data. Internal RAM: 4096 kB. Internal RAM: 256 kB of data. Internal RAM: 3584 kB program constants and symbols.
maximum size of object areas	256 kB of unlocated internal data. 32634 %Mi located internal bits.
default size of object areas	1024 %MWi internal words located internal data. 256 %KWi constant words located internal data. 512 %Mi located internal bits.
application structure	There is no auxiliary task. 1 cyclic/periodic master task. 1 periodic fast task. 64 event tasks.
execution time per instruction	0.12 µs Boolean. 0.17 µs double-length words. 0.25 µs single-length words. 1.16 µs floating points.
number of instructions per ms	6.4 Kinst/ms: 65% Boolean + 35% fixed arithmetic. 8.1 Kinst/ms 100% Boolean.
system overhead	0.13 ms is a is a fast task. 0.7-ms master task.
current consumption	90 mA at 24 V DC.
supply	Internal power supply via rack.
marking	CE.
status LED	1 LED (green) integrated machine/installation bus that is operational (can run). Processor running (RUN) (1 LED green). I/O module fault (I/O) (1 LED red). 1 LED (red) integrated machine/installation bus fault (CAN ERR). 1 LED (red) memory card fault (CARD ERR). Processor or system fault (ERR) (1 LED red). 1 LED (yellow) activity on Modbus (SER COM).
Net Weight	0.46 lb (US) (0.21 kg).

Environment
ambient air temperature for operation	32…140 °F (0…60 °C).
relative humidity	10…95% without condensation.
IP degree of protection	IP20.
protective treatment	TC.
directives	2014/35/EU: Low Voltage Directive. 2014/30/EU: electromagnetic compatibility.
product certifications	CE UL CSA RCM EAC Merchant Navy
standards	EN 61131-2. EN/IEC 61010-2-201. UL 61010-2-201. CSA C22.2 No. 61010-2-201. IACS E10. EN/IEC 61000-6-5. EN/IEC 61850-3.
environmental characteristic	Hazardous location, class I, division 2.

Ordering and shipping details
Category	18160, MODICON M340.
Discount Schedule	PC34.
GTIN	00785901669296.
Nbr. of units in pkg.	1
Package weight(Lbs)	0.55 lb (US) (0.25 kg).
Returnability	No
Country of origin	FR

The BMXP342010 is a processor module in the Modicon M340 series by Schneider Electric, designed for mid-range industrial automation applications. This module provides high performance, scalability, and flexibility, making it suitable for a wide range of industrial processes and control systems.

Key Features

High Performance: The BMXP342010 features a powerful processor that ensures fast execution of control programs, supporting up to 70,000 instructions per millisecond.
Memory: It comes with 4 MB of internal RAM, providing ample space for complex control programs and data storage.
Communication Ports: The module includes built-in Ethernet and serial communication ports, facilitating easy integration and communication with other devices and systems.
Modular Design: The M340 series is known for its modular design, allowing users to customize and expand their automation systems as needed.
Programming: The processor supports multiple programming languages compliant with IEC 61131-3 standards, including ladder logic, function block diagrams, structured text, and more.

Technical Specifications

Processor Speed: high-speed processing capabilities for demanding applications.
Memory: 4 MB of RAM for program storage and execution.
Communication: Ethernet and serial ports for flexible connectivity.
Operating Temperature: 0°C to 60°C.
Power Supply: 24VDC.
Dimensions: Standard dimensions for easy integration into M340 systems.

Applications

The BMXP342010 processor module is used in various industrial automation applications, including:

Manufacturing: control and monitoring of production lines, machinery, and robotic systems.
Process Control: Automation of complex processes in industries such as chemical, pharmaceutical, and food and beverage.
Infrastructure: management of utilities and infrastructure systems, including water treatment plants and energy distribution.

Advantages

Scalability: The modular design allows for easy system expansion and customization.
Reliability: Designed for industrial environments, the module offers robust performance and durability.
Flexibility: supports multiple communication protocols and programming languages, providing versatility in system design and integration.

Conclusion

The BMXP342010 Processor Module M340 by Schneider Electric is a versatile and powerful component for mid-range industrial automation. Its high performance, flexible communication options, and modular design make it an ideal choice for various industrial applications, ensuring efficient and reliable control systems.