Name: ATS48C59Y - soft starter for asynchronous motor
Price: 7515.00 CAD
Availability: InStock
Rating: 4 (1 reviews)

Description

Main
range of product	Altistart 48.
product or component type	Soft starter.
product destination	Asynchronous motors.
product specific application	Heavy duty industry and pumps.
device short name	ATS48.
power supply voltage	208…690 V – 15…10 %.
motor power kW	132 kW at 230 V for severe applications. 160 kW at 230 V for standard applications. 250 kW at 400 V for severe applications. 250 kW at 440 V for severe applications. 315 kW at 400 V for standard applications. 315 kW at 500 V for severe applications. 315 kW at 525 V for severe applications. 355 kW at 440 V for standard applications. 400 kW at 500 V for standard applications.. 400 kW at 525 V for standard applications. 400 kW at 660 V for severe applications. 500 kW at 690 V for severe applications. 560 kW at 660 V for standard applications. 560 kW at 690 V for standard applications.
motor power hp	150 hp at 208 V for severe applications. 200 hp at 230 V for standard applications. 350 hp at 460 V for severe applications. 400 hp at 460 V for standard applications. 400 hp at 575 V for severe applications. 500 hp at 575 V for standard applications.
power dissipation in W	1386 W for standard applications. 1731 W for standard applications.
utilisation category	AC-53A.
type of start	Start with torque control (current limited to 5 In).
Icl nominal current	590 A for connection in the motor supply line for standard applications. 590 A for connection in the motor supply line for severe applications.

Complementary
assembly style	With heat sink.
function available	External bypass (optional).
power supply frequency	50…60 Hz – 5…5 %.
power supply frequency limits	47.5…63 Hz.
device connection	In the motor supply line.
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable. (LO2) logic output 0 V common configurable. (R1) relay outputs fault relay NO. (R2) relay outputs end of starting relay NO. (R3) relay outputs motor powered NO.
output absolute accuracy precision	+/- 5 %
minimum switching current	10 mA at 6 V DC for relay outputs.
maximum switching current	Logic output 0.2 A at 30 V DC. Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms. Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms.
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C. (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm.
discrete input voltage	24 V <= 30 V.
discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V. and <= 2 mA at State 1: > 11 V, >= 5 mA.
starting current	0.4…1.3 Icl adjustable.
analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm.
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop.
transmission rate	4800, 9600 or 19200 bps.
max nodes number	31
protection type	Phase failure: line Thermal protection: motor Thermal protection: starter
marking	CE
operating position	Vertical +/- 10 degree.
height	670 mm
width	400 mm
depth	300 mm
net weight	51.4 kg
Motor power range AC-3	110…220 kW at 200…240 V 3 phases. 250…500 kW at 380…440 V 3 phases. 250…500 kW at 480…500 V 3 phases.
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level A. conforming to IEC 60947-4-2. Damped oscillating waves level 3 conforming to IEC. 61000-4-12. Electrostatic discharge level 3 conforming to IEC. 61000-4-2. Immunity to electrical transients level 4 conforming. to IEC 61000-4-4. Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3. Voltage/current impulse level 3 conforming to IEC 61000-4-5.
standards	EN/IEC 60947-4-2.
product certifications	NOM 117. CSA GOST. DNV. CCC C-Tick. TCF. UL SEPRO.
noise level	55 dB
relative humidity	0…95 % without condensation .or dripping water conforming to EN/IEC 60068-2-3.
ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C). -10…40 °C (without derating).
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating. > 1000…2000 m with current derating of 2.2 % per additional 100 m .