Sale!
The ATS22D75Q is a robust soft starter from Schneider Electric, designed for smooth and efficient motor starting for three-phase asynchronous motors up to 75 kW (100 HP).

ATS22D75Q – soft starter-ATS22-control 220V-power

Original price was: $1,287.00.Current price is: $990.00.

The ATS22D75Q soft starter from Schneider Electric is a reliable and efficient solution for controlling three-phase asynchronous motors.

2 in stock

Category: Tag:

Description

Main
range of product Altistart 22 ATS22D75Q.
product or component type Soft starter.
product destination Asynchronous motors.
product specific application Pumps and fans.
component name ATS22.
network number of phases 3 phases.
[Us] rated supply voltage 230…440 V – 15…10 %.
motor power kW 37 kW 400 V.
37 kW, 440 V.
18.5 kW, 230 V.
factory setting current 69 A
power dissipation in W 63 W for standard applications.
utilisation category AC-53A.
type of start Start with torque control (currently limited to 3.5 inches).
IcL starter rating 75 A for connection in the motor supply line for standard. applications.
IP degree of protection IP20
Complementary
assembly style With a heat sink.
function available Internal bypass.
supply voltage limits 195…484 V.
supply frequency 50…60 Hz, 10…10%.
network frequency 45…66 Hz.
device connection In the motor supply line.
To the motor delta terminals.
[Uc] control circuit voltage 230 V, 15–10% 50/60 Hz.
control circuit consumption 20 W
discrete output number 2
discrete output type Relay outputs R1 230 V running, alarm, trip, stopped., not stopped, starting, ready C/O.
Relay outputs: R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O.
minimum switching current 100 mA at 12 V DC (relay outputs).
maximum switching current 5 A, 250 V AC resistive, 1 relay output.
5 A, 30 V DC resistive, 1 relay output.
2 A 250 V AC inductive 0.4 20 ms relay outputs.
2 A 30 V DC inductive 7 ms relay outputs.
discrete input number 3
discrete input type (LI1, LI2, LI3) logic, 5 mA, 4.3 kOhm.
discrete input voltage 24 V <= 30 V
discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA.
output current 0.4–1 Icl is adjustable.
PTC probe input 750 Ohm.
communication port protocol Modbus.
connector type 1 RJ45.
communication data link Serial.
physical interface RS485 multidrop.
transmission rate 4800, 9600 or 19200 bps.
installed device 31
protection type Phase failure: line.
Thermal protection: motor.
Thermal protection: starter.
marking CE
type of cooling Forced convection.
operating position Vertical +/- 10 degrees.
height 295 mm.
width 145 mm.
depth 207 mm.
net weight 12 kg
Motor power range: AC-3 15…25 kW at 200…240 V, 3 phases.
30…50 kW at 380…440 V in 3 phases.
motor starter type Soft starter.
Environment
electromagnetic compatibility Conducted and radiated emissions at level A, conforming to IEC 60947-4-2.
Damped oscillating waves, level 3, conforming to IEC 61000-4-12.
Electrostatic discharge level 3 conforms to IEC 61000-4-2.
Immunity to electrical transients, level 4, conforming to IEC 61000-4-4.
Immunity to radiated radio-electrical interference level 3 conforms to IEC 61000-4-3.
Voltage/current impulse level 3 conforms to IEC 61000-4-5.
standards EN/IEC 60947-4-2.
product certifications CSA
UL
GOST
CCC
C-Tick
vibration resistance 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6.
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6.
shock resistance 15 gn for 11 ms, conforming to EN/IEC 60068-2-27
noise level 45 dB.
pollution degree Level 2 conforms to IEC 60664-1.
relative humidity 0…95% without condensation or dripping water, conforming to EN/IEC 60068-2-3.
ambient air temperature for operation -10…40 °C (without derating).
40…60 °C (with current derating 2.2 % per °C).
ambient air temperature for storage -25…70 °C.
operating altitude <= 1000 m without derating.
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m.
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1: Weight 8.356 kg
Package 1: Height 23.5 cm
Package: 1 width 31 cm
Package 1 Length 36 cm
Unit Type of Package 2 P06
Number of Units in Package 2 6
Package 2: Weight 63.136 kg
Package 2: Height 73.5 cm
Package 2 width 80 cm
Package 2 Length 60 cm
Offer Sustainability
Sustainable offer status Green Premium product ATS22D75Q.
REACh Regulation REACh Declaration.
EU RoHS Directive
Pro-active compliance (Product outside of EU RoHS legal scope)

EU RoHS Declaration ATS22D75Q.
Mercury free Yes
RoHS exemption information Yes
China’s RoHS Regulation China RoHS declaration.
Environmental Disclosure Product Environmental Profile.
Circularity Profile End-of-life information.
WEEE The product must be disposed of on European Union markets. following specific waste collection and never end up in rubbish bins.
California proposition 65 Warning: This product can expose you to chemicals, including. Lead and lead compounds, which are known to the State of California to cause cancer,. birth defects or other reproductive harm,. For more information, go to. www.P65Warnings.ca.gov.

The ATS22D75Q is a soft starter from Schneider Electric, specifically designed to provide efficient and smooth motor starting for three-phase asynchronous motors. This device is part of the Altistart 22 series and offers advanced control features, protection, and ease of integration, making it an ideal choice for various industrial applications. Here is a comprehensive overview of the ATS22D75Q soft starter.

Specifications

The ATS22D75Q soft starter is engineered to handle the rigors of industrial motor control. Key specifications include:

  • Power Rating: 75 kW (100 HP)
  • Voltage Range: 230V to 440V AC
  • Control Voltage: 220V AC
  • Current Rating: 150 A
  • Frequency: 50/60 Hz
  • Operating Temperature: -10°C to +40°C (with derating up to +60°C)
  • Certifications: CE, UL, CSA

These specifications ensure the ATS22D75Q can efficiently manage motor starts and stops, reducing mechanical stress and extending the lifespan of the motor.

Features

The ATS22D75Q offers several features that enhance its functionality and usability:

  1. Smooth Start and Stop: The soft starter provides smooth acceleration and deceleration, reducing mechanical stress on the motor and connected equipment. This helps prolong the lifespan of the machinery.
  2. Built-in Bypass: The ATS22D75Q features an integrated bypass contactor that improves energy efficiency by reducing power losses during normal running conditions.
  3. Thermal Protection: The device includes motor thermal protection to prevent overheating, ensuring safe operation and reducing the risk of damage.
  4. Easy Integration: The compact design and flexible mounting options make it easy to integrate the ATS22D75Q into existing control panels and systems.
  5. Advanced Diagnostics: The soft starter provides real-time monitoring and diagnostics, allowing for quick identification and resolution of issues, thus minimizing downtime.
  6. User-Friendly Interface: The device features a user-friendly interface with a keypad and display, making it easy to configure and operate.

Applications

The ATS22D75Q is suitable for various industrial applications, including:

  • Pumps: In pump applications, the soft starter helps prevent water hammering and reduces wear on the pump and piping system.
  • Fans and Blowers: It provides smooth starting and stopping of fans and blowers, reducing mechanical stress and noise.
  • Compressors: The ATS22D75Q ensures smooth operation of compressors, minimizing mechanical wear and extending equipment life.
  • Conveyors: In conveyor systems, the soft starter offers controlled acceleration and deceleration, preventing product damage and enhancing system reliability.
  • Mixers and Agitators: The device provides precise control over the starting and stopping of mixers and agitators, reducing mechanical stress and improving process control.

Related products