Description
| range of product |
Modicon X80
|
|
|---|---|---|
| product or component type |
Discrete output module
|
|
| discrete output number |
64, conforming to EN/IEC 61131-2
|
|
| discrete output type |
Solid state
|
|
| discrete output logic |
Positive
|
|
| discrete output voltage |
24 V, 19… 30 V DC
|
|
| discrete output current |
0.1 A
|
| current per channel |
0.125 A
|
|
|---|---|---|
| maximum current per module |
6.4 A
|
|
| insulation resistance |
> 10 MOhm, 500 V DC
|
|
| power dissipation in W |
6.85 W
|
|
| response time on output |
1.2 ms
|
|
| paralleling of outputs |
Yes : 3 maximum
|
|
| typical current consumption |
160 mA at 3.3 V DC
|
|
| MTBF reliability |
159924 H
|
|
| protection type |
reverse-polarity protection
External short-circuit protection overload protection overvoltage protection |
|
| output overload protection |
With current limiter
With electronic circuit breaker, 0.125 A < ID < 0.185 A |
|
| output overvoltage protection |
With transil diode
|
|
| output short-circuit protection |
With an external fuse
|
|
| reverse-polarity protection |
Reverse-mounted diode
|
|
| voltage detection threshold |
< 14 V DC preactuator fault
> 18 V DC preactuator at state 0 |
|
| maximum tungsten load |
1.2 W
|
|
| switching frequency |
0.5/LI² Hz
|
|
| maximum overload time |
15 ms
|
|
| load impedance ohmic |
>= 220 Ohm
|
|
| status LED |
1 LED (green) + 32-channel indicator
1 LED (green) module operating (RUN) 1 LED per channel (green) 1 LED (red) module error (ERR) 1 LED (red) module I/O |
|
| net weight |
0.15 kg
|
| IP degree of protection |
IP20
|
|
|---|---|---|
| directives |
2014/35/EU: Low Voltage Directive
2014/30/EU: electromagnetic compatibility |
|
| dielectric strength |
1500 V AC at 50/60 Hz, 1 minute, output/ground
1500 V AC at 50/60 Hz, 1 minute, output/internal logic 500 V DC 1 minute, between group of channels |
|
| vibration resistance |
3 gn
|
|
| shock resistance |
30 gn
|
|
| ambient air temperature for storage |
-40…85 °C
|
|
| ambient air temperature for operation |
0…60 °C
|
|
| relative humidity |
5…95 % at 55 °C without condensation
|
|
| operating altitude |
0…2000 m
2000…5000 m with derating factor |
| Package 1 Weight |
0.194 kg
|
|
|---|---|---|
| Package 1 Height |
5.600 cm
|
|
| Package 1 width |
11.200 cm
|
|
| Package 1 Length |
11.600 cm
|
| Sustainable offer status |
Green Premium product
|
|
|---|---|---|
| REACh Regulation |
REACh Declaration
|
|
| REACh free of SVHC |
Yes
|
|
| EU RoHS Directive |
Pro-active compliance (Product outside of EU RoHS legal scope)
EU RoHS Declaration |
|
| Mercury free |
Yes
|
|
| RoHS exemption information | ||
| China’s RoHS Regulation |
China RoHS declaration
|
|
| Environmental Disclosure |
Product Environmental Profile
|
|
| Circularity Profile |
End-of-life information
|
|
| WEEE |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
The BMXDDO6402K is a discrete output module designed for the Modicon X80 automation platform by Schneider Electric. This module plays a crucial role in industrial automation systems by providing a reliable means to control various output devices through discrete signals. Here’s an in-depth look at its features, functionalities, and applications.
Key Features
- Output Channels: The BMXDDO6402K features 16 discrete output channels. Each channel can be individually controlled, allowing for precise management of connected devices.
- Output Type: It is designed for digital output operations. This means it can only send discrete signals (ON/OFF) rather than analog signals. Each output channel can be set to deliver a high (ON) or low (OFF) state.
- Output Voltage and Current: The module is typically designed to operate with a standard 24V DC output voltage. Each channel can handle a maximum current of up to 0.5 A. This makes it suitable for controlling devices such as relays, solenoids, and small motors.
- Isolation: The BMXDDO6402K module features electrical isolation between the output channels and the internal logic of the module. This isolation helps protect the module and the connected control system from electrical faults and noise.
- Connection Interface: It uses screw terminal connections for interfacing with external devices. This type of connection is straightforward and reliable, ensuring secure and stable connections.
- Diagnostic LEDs: The module is equipped with diagnostic LEDs that provide real-time feedback on the status of each output channel. These LEDs indicate whether the output is active or not, helping in troubleshooting and maintenance.
- Hot-Swap Capability: The BMXDDO6402K supports hot-swapping, which means it can be replaced or added to the system without needing to power down the entire automation system. This feature enhances system reliability and reduces downtime during maintenance.
Functional Overview
- Control of Discrete Devices: The primary function of the BMXDDO6402K is to control discrete devices such as lights, alarms, and other on/off type actuators. It translates digital control signals from the control system into physical actions by these devices.
- Integration with PLC Systems: This module integrates seamlessly with the Modicon X80 PLC systems, forming a part of a larger control network. It interfaces with the PLC’s internal logic and executes commands based on the programmed logic.
- Reliability and Robustness: Designed for industrial environments, the BMXDDO6402K is built to withstand harsh conditions. Its robust construction ensures reliable operation, even in demanding industrial settings.
- Flexibility and Scalability: The discrete output module is part of a modular system that allows for easy expansion and adaptation. As automation needs grow or change, additional modules can be integrated into the X80 platform to enhance system capabilities.
- Ease of Configuration: Configuration of the BMXDDO6402K is straightforward, thanks to its compatibility with Schneider Electric’s configuration and programming tools. This ease of setup reduces installation time and errors.
Applications
- Manufacturing Processes: In manufacturing settings, the BMXDDO6402K can be used to control machinery and equipment that requires discrete on/off control, such as conveyor belts, robotic arms, and packaging machines.
- Building Automation: For building management systems, it can control lighting systems, HVAC equipment, and security systems, providing a means to manage these systems efficiently and reliably.
- Transportation Systems: In transportation applications, the module can be used to control signals, gates, and other discrete components crucial for the operation of transit systems.
- Utilities and Infrastructure: It can also be employed in utility management and infrastructure projects, controlling pumps, valves, and other equipment essential for the operation of water treatment plants, power stations, and similar facilities.
Conclusion
The BMXDDO6402K discrete output module is a vital component in the Modicon X80 platform, offering robust, reliable, and flexible control for various industrial and commercial applications. Its features, such as individual channel control, electrical isolation, and hot-swapping capability, make it an essential tool for modern automation systems. By integrating this module into a control system, users can enhance the performance and reliability of their automation processes, ensuring smooth and efficient operation across various applications.
