Description
| range | PowerLogic |
|---|---|
| product name | PowerLogic PM5000 |
| device’s short name | PM5330 |
| product or component type | Power meter |
| power quality analysis | Up to the 31st harmonic. |
|---|---|
| device application | Power monitoring Multi-tariff. |
| type of measurement | Current Voltage Frequency. Power factor Energy. Active and reactive power. |
| supply voltage | 100…415 V AC 45…65 Hz 125–250 V DC. |
| network frequency | 50 Hz 60 Hz |
| [In] rated current | 1 A 5 A |
| type of network | 3P + N 3P. 1P + N |
| maximum power consumption in VA | 10 VA at 415 V. |
| ride-through time | 80 ms. 120 V AC is typical 100 ms, 230 V AC is typical. 100 ms 415 V AC, typical. |
| display type | Backlit LCD |
| display resolution | 128 x 128 pixels |
| sampling rate | 64 samples/cycle |
| measurement current | 10…9000 mA |
| analogue input type | Voltage (impedance: 5 MOhm). Current (impedance 0.3 mOhm). |
| measurement voltage | 35–690 V AC, 45–65 Hz between phases. 20–400 V AC, 45–65 Hz between phase and neutral. |
| frequency measurement range | 45…65 Hz |
| number of inputs | 2 digital |
| measurement accuracy | Active energy +/- 0.5 %. Reactive energy +/- 2%. Active power +/- 0.5 %. Apparent power +/- 0.5%. Frequency +/- 0.05 %. Power factor +/- 0.005. Current +/- 0.5%. Voltage +/- 0.5%. |
| accuracy class | Class 0.5S active energy conforms to IEC 62053-22. |
| number of outputs | 2 relay. 2 digital. |
| information displayed | Tariff (4) |
| communication port protocol | Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds, even/odd or none—2 wires, insulation 2500 V JBUS. |
| communication port support | RS485 |
| data recording | Maintenance logs. Time stamping. Alarm logs. Data logs. Min/max of instantaneous values. Event logs. |
| memory capacity | 256 kB |
| connections—terminals | Voltage circuit: screw terminal block 4. Control circuit: screw terminal block 2. Current transformer: screw terminal block 6. Input/output circuit: screw terminal block 6. Relay output: screw terminal block 4. Ethernet network: RJ45 connector. |
| mounting mode | Flush-mounted |
| mounting support | Framework |
| standards | UL 61010-1 IEC 62053-22 IEC 61557-12. EN 50470-3 IEC 60529. IEC 62053-24 EN 50470-1. |
| product certifications | CE conforming to IEC 61010-1 CULus conforms to UL 61010-1. |
| width | 96 mm |
| depth | 72 mm |
| height | 96 mm |
| net weight | 430 g |
| electromagnetic compatibility | Limits for harmonic current emissions in class A conforming to IEC 61000-3-2. Electrostatic discharge level 4 conforms to IEC 61000-4-2. Conducted RF disturbances at level 3, conforming to IEC 61000-4-6. Magnetic field at power frequency level 4 conforms to IEC 61000-4-8. Conducted and radiated emissions in class B, conforming to EN 55022. |
|---|---|
| IP degree of protection | IP52 front: conforming to IEC 60529. IP30 body: conforming to IEC 60529. |
| relative humidity | 5% at 50 °C. |
| pollution degree | 2 |
| ambient air temperature for operation | -25…70 °C |
| ambient air temperature for storage | -40…85 °C |
| operating altitude | 2000 m |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1: Weight | 550.0 g |
| Package 1: Height | 11.0 cm |
| Package: 1 width | 12.6 cm |
| Package 1 Length | 12.6 cm |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 12 |
| Package 2: Weight | 7.6 kg |
| Package 2: Height | 30.0 cm |
| Package 2 width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 288 |
| Package 3: Weight | 206.4 kg |
| Package 3: Height | 105.0 cm |
| Package 3 width | 80.0 cm |
| Package 3 Length | 120.0 cm |
Installation and Maintenance
- Installation:
- Designed for easy installation on DIN rails or panels within electrical cabinets.
- Standard connectors and wiring make installation straightforward.
- Maintenance:
- Requires minimal maintenance due to its robust design.
- Regular calibration and firmware updates ensure continued accuracy and functionality.
