Sale!

BMXDDM3202K Modicon X80

Original price was: $471.00.Current price is: $363.00.

The BMXDDM3202K is a mixed I/O module from the Modicon X80 range by Schneider Electric.

7 in stock

Free shipping on orders over $5000!

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
Category:

Description

Main
range of productModicon X80
product or component typeDiscrete I/O module
discrete input number8
input typeCurrent sink (logic positive)
discrete input voltage24 V DC, discrete input logic: positive
discrete input current3.5 mA
discrete output number8
discrete output typeSolid state
discrete output voltage24 V, 19… 30 V DC
discrete output current0.5 A
Complementary
input compatibilityWith 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2.
With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 type 3.
Sensor power supply19…30 V
current state is guaranteed>= 3 mA
current state 0 guaranteed<= 1.5 mA
current per channel0.625 A
maximum current per module5 A
maximum leakage current0.5 mA at state 0
maximum voltage drop<1.2 V at state 1
input impedance6800 Ohm
insulation resistance> 10 MOhm 500 V DC
power dissipation in W3.7 W
DC typical response time4 ms
DC maximum response time7 ms
response time on output1.2 ms
paralleling of outputsYes : 2 maximum
typical current consumption79 mA at 3.3 V DC
59 mA at 24 V DC
current consumption<= 111 mA at 3.3 V DC
<= 67 mA at 24 V DC.
MTBF reliability427772 H
protection type1 external fuse per group of input channels A fast blow.
overvoltage protection on output
reverse polarity protection on input.
reverse polarity protection on output.
output overload protectionWith current limiter
With an electronic circuit breaker, 1.5 In < ID < 2 In.
output overvoltage protectionWith transil diode
output short-circuit protectionWith an external fuse
reverse-polarity protectionReverse-mounted diode
voltage detection threshold< 14 V DC preactuator fault
< 14 V DC sensor fault.
> 18 V DC preactuator OK
> 18 V DC sensor OK.
switching frequency0.5/LI² Hz
maximum overload time15 ms
load impedance ohmic>= 48 Ohm
status LED1 LED (green) module operating (RUN)
1 LED per channel (green) is diagnostic.
1 LED (red) module error (ERR)
1 LED (red) module I/O.
net weight0.115 kg
Environment
IP degree of protectionIP20
directives2014/35/EU: Low Voltage voltage directive.
2014/30/EU: electromagnetic compatibility.
dielectric strength1500 V AC at 50/60 Hz, 1 minute, output/ground
1500 V AC at 50/60 Hz, 1 minute, output/internal logic.
1500 V AC at 50/60 Hz, 1 minute, primary/secondary.
500 V DC, 1 minute, between groups of inputs and outputs.
vibration resistance3 gn
shock resistance30 gn
ambient air temperature for storage-40…85 °C
ambient air temperature for operation0…60 °C
relative humidity5…95 % at 55 °C without condensation
operating altitude0…2000 m
2000–5000 m with a derating factor.
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1: Weight145.0 g
Package 1: Height5.5 cm
Package: 1 width11.0 cm
Package 1 Length12.0 cm
Unit Type of Package 2S02
Number of Units in Package 215
Package 2: Weight2.44 kg
Package 2: Height15.0 cm
Package 2 width30.0 cm
Package 2 Length40.0 cm