METSEPM5310R – power meter PowerLogic PM5310R

Description

Main

range	PowerLogic.
product name	PowerLogic PM5000.
device short name	PM5310R.
product or component type	Power meter.

Complementary

power quality analysis	Up to the 31st harmonic.
device application	Power monitoring. Multi-tariff.
type of measurement	Current. Voltage. Frequency… Energy. Active and reactive power.
supply voltage	100…415 V AC 45…65 Hz. 125…250 V DC.
network frequency	50 Hz 60 Hz
[In] rated current	5 A 1 A
type of network	1P + N 3P 3P + N
maximum power consumption in VA	10 VA at 415 V
ride-through time	80 ms 120 V AC typical. 100 ms 230 V AC typical. 100 ms 415 V AC typical.
display type	Backlit LCD.
display resolution	128 x 128 pixels.
sampling rate	64 samples/cycle.
measurement current	10…9000 mA.
analogue input type	Voltage (impedance 5 MOhm). Current (impedance 0.3 mOhm).
measurement voltage	35…690 V AC 45…65 Hz between phases. 20…400 V AC 45…65 Hz between phase and neutral.
frequency measurement range	45…65 Hz.
number of inputs	2 digital
measurement accuracy	Active energy +/- 0.5 %. Reactive energy +/- 2 %. Active power +/- 0.5 %. Apparent power +/- 0.5 %. Frequency +/- 0.05 %. Power factor +/- 0.005. Current +/- 0.5 %. Voltage +/- 0.5 %.
accuracy class	Class 0.5S active energy conforming to IEC 62053-22.
number of outputs	2 digital.
information displayed	Tariff (4)
communication port protocol	Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds. even/odd or none – 2 wires, insulation 2500 V. JBUS.
communication port support	RS485.
data recording	Maintenance logs. Time stamping. Event logs. Data logs. Min/max of instantaneous values. Alarm logs.
memory capacity	256 kB
connections – terminals	Voltage circuit: screw terminal block4. Control circuit: screw terminal block2. Input/output circuit: screw terminal block6. Relay output: screw terminal block4. Ethernet network: RJ45 connector. Current transformer: RJ45 connector1.
mounting mode	Flush-mounted.
mounting support	Framework
standards	IEC 61557-12. IEC 62053-22. EN 50470-3. IEC 62053-24. UL 61010-1. EN 50470-1. IEC 60529.
product certifications	CE conforming to IEC 61010-1. CULus conforming to UL 61010-1.
width	96 mm
depth	72 mm
height	96 mm
net weight	430 g

Environment

electromagnetic compatibility	Limits for harmonic current emissions class A conforming to IEC 61000-3-2. Electrostatic discharge level 4 conforming to IEC 61000-4-2. Conducted RF disturbances level 3 conforming to IEC 61000-4-6. Magnetic field at power frequency level 4 conforming to IEC 61000-4-8. Conducted and radiated emissions class B conforming to EN 55022.
IP degree of protection	IP52 front: conforming to IEC 60529. IP30 body: conforming to IEC 60529.
relative humidity	5…95 % at 50 °C
pollution degree	2
ambient air temperature for operation	-25…70 °C
ambient air temperature for storage	-40…85 °C
operating altitude	2000 m

Packing Units

Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Weight	275.0 g
Package 1 Height	9.05 cm
Package 1 width	9.6 cm
Package 1 Length	9.6 cm
Unit Type of Package 2	S03
Number of Units in Package 2	12
Package 2 Weight	5.99 kg
Package 2 Height	30 cm
Package 2 width	30 cm
Package 2 Length	40 cm
Package 3 Height	750 mm

The METSEPM5310R, commonly known as the PowerLogic PM5310R, is a sophisticated power meter designed for precise monitoring and management of electrical power systems. This device is part of Schneider Electric’s PowerLogic series, which is renowned for its accuracy and reliability in industrial and commercial applications. The PM5310R is engineered to provide detailed insights into power consumption, quality, and system performance, helping users optimize energy use and improve operational efficiency.

Overview

The PowerLogic PM5310R is a versatile power meter that combines advanced measurement capabilities with user-friendly features. It is designed for applications where accurate power monitoring and analysis are critical. The meter supports a wide range of electrical parameters and provides real-time data that can be used for energy management, system diagnostics, and performance optimization.

Key Features

1. Advanced Measurement Capabilities: The PM5310R offers comprehensive measurement of electrical parameters, including voltage, current, power, energy, and power factor. It provides accurate readings of both fundamental and harmonic components, making it suitable for detailed power quality analysis. The meter supports three-phase measurements and is capable of monitoring both balanced and unbalanced loads.
2. High-Resolution Display: The device features a high-resolution LCD display that provides clear and detailed information on various electrical parameters. The user-friendly interface allows for easy navigation through the menu and quick access to essential data. The display can show real-time values, historical data, and trend graphs, enabling users to monitor and analyze power consumption effectively.
3. Communication and Integration: The PM5310R supports various communication protocols, including Modbus, Profibus, and Ethernet. This enables seamless integration with existing industrial control systems and energy management platforms. The meter’s communication capabilities allow for remote monitoring, data logging, and integration with building management systems (BMS) or supervisory control and data acquisition (SCADA) systems.
4. Power Quality Analysis: One of the standout features of the PM5310R is its power quality analysis capabilities. The meter can measure and report on harmonics, voltage dips, swells, and other power quality issues. This helps in diagnosing electrical problems, ensuring compliance with power quality standards, and improving overall system reliability.
5. Energy Management: The PM5310R is equipped with energy management features that enable users to track and analyze energy consumption patterns. It supports data logging of energy usage, peak demand, and other key metrics. This information is invaluable for identifying opportunities for energy savings, optimizing load management, and reducing operational costs.
6. User-Friendly Configuration: Configuration of the PM5310R is straightforward, thanks to its intuitive setup menus and calibration options. The meter can be easily configured using its front panel or remotely through its communication interfaces. This flexibility allows for quick adaptation to various applications and installation scenarios.
7. Durability and Reliability: Designed for industrial environments, the PM5310R is built to withstand harsh conditions. It has a rugged construction that protects it from dust, moisture, and temperature extremes. Its reliable performance ensures consistent operation and accurate measurements over time.
8. Data Logging and Analysis: The meter includes data logging functionality that enables users to record and analyze historical data. This feature is useful for identifying trends, conducting performance analysis, and generating reports. Users can review data logs to assess system performance and make informed decisions based on historical trends.
9. Compliance and Standards: The PM5310R complies with various industry standards for electrical measurement and power quality. This ensures that the meter delivers accurate and reliable readings and meets the requirements of regulatory and industry standards.

Applications

1. Industrial Power Monitoring: The PM5310R is ideal for monitoring electrical systems in industrial facilities. It helps in managing power distribution, diagnosing electrical faults, and ensuring the reliable operation of machinery and equipment.
2. Commercial Buildings: In commercial buildings, the PM5310R aids in energy management by tracking energy consumption, identifying inefficiencies, and optimizing building systems. Its power quality analysis capabilities are valuable for maintaining electrical system performance and compliance.
3. Data Centers: Data centers benefit from the PM5310R’s precise monitoring and analysis features. The meter helps in managing power usage, ensuring uptime, and optimizing cooling and power distribution systems.
4. Utility Monitoring: Utilities can use the PM5310R for monitoring and analyzing power quality across their networks. The meter provides valuable insights for maintaining grid stability, diagnosing issues, and ensuring reliable power delivery.

Advantages

1. Accuracy and Precision: The PM5310R provides highly accurate measurements of electrical parameters, ensuring reliable data for decision-making and analysis. Its precision helps in identifying issues and optimizing system performance.
2. Comprehensive Data: The meter offers a wide range of measurement and analysis capabilities, providing users with detailed insights into power quality and energy usage. This comprehensive data supports effective energy management and system optimization.
3. Flexible Integration: With support for multiple communication protocols, the PM5310R integrates seamlessly with various control systems and platforms. This flexibility enhances its applicability in different industrial and commercial environments.
4. User-Friendly Interface: The high-resolution display and intuitive interface make it easy to navigate and configure the meter. This user-friendly design simplifies setup and operation, improving overall usability.
5. Enhanced Energy Management: The PM5310R’s energy management features enable users to track and analyze energy consumption, leading to cost savings and improved efficiency. Its data logging capabilities support informed decision-making and trend analysis.

Conclusion

The METSEPM5310R PowerLogic PM5310R is a high-performance power meter designed to meet the needs of modern industrial and commercial power monitoring applications. With its advanced measurement capabilities, robust communication options, and user-friendly features, it provides valuable insights into power quality and energy usage. Its durability and reliability make it a suitable choice for demanding environments, helping users optimize energy management and enhance system performance.