Name: ATS48C21Y Schneider Electric
SKU: 6846
Availability: InStock

Description

Main
Range of product	Altistart 48.
Product or component type	Soft starter.
Product destination	Asynchronous motors.
Product specific application	Heavy duty industry and pumps.
device short name	ATS48.
Utilisation category	AC-53A.
Ue power supply voltage	208…690 V – 15…10 %.
power supply frequency	50…60 Hz – 5…5 %.
Motor power kW	110 kW at 400 V for standard applications. 110 kW at 440 V for standard applications. 110 kW at 500 V for severe applications. 110 kW at 525 V for severe applications. 132 kW at 500 V for standard applications. 132 kW at 525 V for standard applications. 132 kW at 660 V for severe applications. 160 kW at 660 V for standard applications. 160 kW at 690 V for severe applications. 200 kW at 690 V for standard applications. 45 kW at 230 V for severe applications. 55 kW at 230 V for standard applications. 90 kW at 400 V for severe applications. 90 kW at 440 V for severe applications.
Motor power hp	125 hp at 460 V for severe applications. 150 hp at 460 V for standard applications. 150 hp at 575 V for severe applications. 200 hp at 575 V for standard applications. 50 hp at 208 V for severe applications. 60 hp at 208 V for standard applications. 60 hp at 230 V for severe applications. 75 hp at 230 V for standard applications.

Complementary
device connection	In the motor supply line.
Protection type	Phase failure: line. Thermal protection: motor. Thermal protection: starter.
Standards	EN/IEC 60947-4-2.
product certifications	DNV GOST SEPRO TCF UL CCC NOM 117 C-Tick CSA
Marking	CE
Discrete input number	5
Discrete input type	PTC, 750 Ohm at 25 °C. (Stop, Run, LI3, LI4) logic, <= 8 mA, 4300 Ohm.
Discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA.
Minimum switching current	10 mA at 6 V DC for relay outputs.
Discrete output number	2
Discrete output type	(LO1) logic output 0 V is common configurable. (LO2) logic output 0 V is common configurable. (R1) relay outputs fault relay NO. (R2) relay outputs the end of starting relay NO. (R3) relay outputs motor-powered NO.
Analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm.
communication port protocol	Modbus.
connector type	1 RJ45
Communication data link	Serial
Physical interface	RS485 multidrop.
Transmission rate	4800, 9600, or 19200 bps.
function available	External bypass (optional).
Operating position	Vertical +/- 10 degrees.
Height	380 mm.
Width	320 mm.
Depth	265 mm.
Net weight	18.2 kg.

Environment
Electromagnetic compatibility	Conducted and radiated emissions at level A, conforming to IEC 60947-4-2. Damped oscillating waves level 3 conforms to IEC 61000-4-12. Electrostatic discharge level 3 conforms to IEC 61000-4-2. Immunity to electrical transients, level 4, conforms to IEC 61000-4-4. Immunity to radiated radio-electrical interference level 3 conforms to IEC 61000-4-3. Voltage/current impulse level 3 conforms to IEC 61000-4-5.
Relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C) -10…40 °C (without derating).
Ambient air temperature for storage	-25…70 °C.
Operating altitude	<= 1000 m without derating. > 1000…2000 m with current derating of 2.2 % per additional 100 m

ATS48C21Y Schneider Electric