Description
| range | PowerLogic |
|---|---|
| product name | PowerLogic PM5350 |
| device’s short name | PM5350 |
| product or component type | Power meter |
| power quality analysis | Total demand distortion total harmonic distortion. |
|---|---|
| device application | Power monitoring |
| type of measurement | Current. Voltage Frequency. Power factor Energy. Phase angle. Apparent power Active power. Reactive power. |
| supply voltage | 85…265 V AC 45…65 Hz 100–300 V DC. |
| network frequency | 50 Hz 60 Hz |
| [In] rated current | 5 A 1 A |
| type of network | 1P + N 3P + N 3P |
| maximum power consumption in VA | 9.6 VA |
| ride-through time | 80 ms. 120 V AC is typical. 100 ms, 230 V AC is typical. 100 ms, 415 V AC is typical. |
| display type | Backlit LCD |
| display resolution | 6 lines |
| sampling rate | 32 samples/cycle. |
| measurement current | 0…1 A. 0…5 A. |
| analogue input type | Current: 0.05…9 A (impedance <= 0.3 Ohm). |
| measurement voltage | 20…690 V AC phase to phase. 20…400 V AC phase to neutral. |
| frequency measurement range | 45…70 Hz. |
| number of inputs | 4 digital. |
| measurement accuracy | Current: 0.3 %. Voltage: 0.3 %. Frequency: 0.05 %. Power factor +/- 0.005. |
| accuracy class | Class 0.5S active energy conforming to IEC. 62053-22. Class 0.5 active energy according to IEC 61557-12. Class 3 reactive energy conforming to IEC 62053-23. Class 2 reactive energy conforms to IEC 61557-12. Class 0.5 power conforms to IEC 61557-12. |
| number of outputs | 2 relay |
| information displayed | Tariff (4) |
| communication port protocol | JBUS Modbus RTU and ASCII at 9.6, 19.2, and 38.4 kbauds. |
| communication port support | Terminal block: RS485 |
| data recording | Min/max of instantaneous values Alarms. |
| connections—terminals | Voltage circuit: screw terminal block4. Control circuit: screw terminal block 2. Current transformer: screw terminal block 6 Input/output circuit: screw terminal block6. Relay output: screw terminal block4. Ethernet network: RJ45 connector. |
| mounting mode | Flush-mounted. |
| type of installation | Indoor installation. |
| standards | IEC 61010-1. |
| product certifications | CE CULus |
| width | 96 mm |
| depth | 44 mm |
| height | 96 mm |
| net weight | 0.25 kg |
| electromagnetic compatibility | Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3. Electrostatic discharge conforming to IEC 61000-4-2. Susceptibility to electromagnetic fields conforming to IEC 61000-4-3. Electrical fast transient/burst immunity test conforming to IEC 61000-4-4. 1.2/50 µs shock wave immunity test conforming to IEC 61000-4-5. Conducted RF disturbances conforming to IEC 61000-4-6. Immunity to impulse waves conforming to IEC 61000-4-12. Conducted and radiated emissions, class A, conforming to EN 55011. Limits for harmonic current emissions conform to IEC 61000-3-2. |
|---|---|
| overvoltage category | III |
| IP degree of protection | IP30 back: conforming to IEC 60529. IP51 front face: conforming to IEC 60529. |
| relative humidity | 0…95 % at 50 °C |
| pollution degree | 2 |
| ambient air temperature for operation | -25…70 °C |
| ambient air temperature for storage | -40…85 °C |
| operating altitude | 0…3000 m |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1: Weight | 358.0 g |
| Package 1: Height | 11.2 cm |
| Package: 1 width | 12.5 cm |
| Package 1 Length | 12.7 cm |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 12 |
| Package 2: Weight | 4.962 kg |
| Package 2: Height | 30.0 cm |
| Package 2 width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 288 |
| Package 3: Weight | 216.0 kg |
| Package 3: Height | 105.0 cm |
| Package 3 width | 80.0 cm |
| Package 3 Length | 120.0 cm |
