Name: ATS22C48Q - soft starter-ATS22-control 220V-power
Price: 3816.00 CAD
Availability: InStock

Description

**Main**
range of product	Altistart 22.
product or component type	Soft starter.
product destination	Asynchronous motors.
product-specific application	Pumps and fans.
component name	ATS22.
network number of phases	3 phases..
[Us] rated supply voltage	230…440 V, 15…10 %
motor power kW	132 kW 230 V. 250 kW, 400 V. 250 kW, 440 V.
factory setting current	437 A
power dissipation in W	218 W for standard applications.
utilisation category	AC-53A.
type of start	Start with torque control (currently limited to 3.5 inches).
IcL starter rating	480 A for connection in the motor supply line for standard. applications
IP degree of protection	IP00.

**Complementary**
assembly style	With a heat sink.
function available	Internal bypass.
supply voltage limits	195…484 V
supply frequency	50…60 Hz, 10…10%.
network frequency	45…66 Hz
device connection	In the motor supply line. To the motor delta terminals.
[Uc] control circuit voltage	230 V, 15–10% 50/60 Hz.
control circuit consumption	20 W
discrete output number	2
discrete output type	Relay outputs: R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O. Relay outputs: R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O.
minimum switching current	100 mA at 12 V DC (relay outputs).
maximum switching current	5 A, 250 V AC resistive, 1 relay output. 5 A, 30 V DC resistive, 1 relay output. 2 A 250 V AC inductive 0.4 20 ms relay outputs. 2 A 30 V DC inductive 7 ms relay outputs.
discrete input number	3
discrete input type	(LI1, LI2, LI3) logic, 5 mA, 4.3 kOhm.
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA.
output current	0.4–1 Icl is adjustable.
PTC probe input	750 Ohm.
communication port protocol	Modbus.
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop.
transmission rate	4800, 9600, or 19200 bps.
installed device	31
protection type	Phase failure: line. Thermal protection: motor. Thermal protection: starter.
marking	CE
type of cooling	Forced convection.
operating position	Vertical +/- 10 degrees.
height	455 mm.
width	304 mm.
depth	339.7 mm.
net weight	50 kg
Motor power range: AC-3	110…220 kW at 200…240 V in 3 phases. 250…500 kW at 380…440 V in 3 phases.
motor starter type	Soft starter

**Environment**
electromagnetic compatibility	Conducted and radiated emissions at level A, conforming to IEC 60947-4-2. Damped oscillating waves level 3 conforms to IEC 61000-4-12. Electrostatic discharge level 3 conforms to IEC 61000-4-2. Immunity to electrical transients, level 4, conforms to IEC 61000-4-4. Immunity to radiated radio-electrical interference level 3 conforms to IEC 61000-4-3. Voltage/current impulse level 3 conforms to IEC 61000-4-5.
standards	EN/IEC 60947-4-2.
product certifications	GOST CSA UL C-Tick CCC
vibration resistance	1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6. 1.5 mm (f = 2…13 Hz) conforming to EN/IEC 60068-2-6.
shock resistance	15 gn for 11 ms, conforming to EN/IEC 60068-2-27.
noise level	56 dB.
pollution degree	Level 2 conforms to IEC 60664-1.
relative humidity	0…95%% without condensation or dripping water. conforming to EN/IEC 60068-2-3.
ambient air temperature for operation	-10…40 °C (without derating). 40…60 °C (with current derating 2.2 % per °C).
ambient air temperature for storage	-25…70 °C.
operating altitude	<= 1000 m without derating. > 1000…< 2000 m with current derating of 2.2 % per additional 100 m.

**Packing Units**
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Weight	40.0 kg
Package 1 Height	54.5 cm
Package 1 width	40.0 cm
Package 1 Length	57.5 cm
Unit Type of Package 2	PAL
Number of Units in Package 2	1
Package 2 Weight	40.0 kg
Package 2 Height	54.5 cm
Package 2 width	40.0 cm
Package 2 Length	57.5 cm